Smart Garage Makeovers
Your car deserves a luxury living room.
Service Tiers
The Foundation
Transform the feel of the garage immediately.
- Premium Polyaspartic floor coating
- Baseboard finishing
- Basic LED lighting upgrade
- Fresh paint
The Organization
Sleek, off-the-floor storage and superior lighting.
- Custom modular cabinetry
- Wall-to-wall slatwall systems
- Overhead storage racks
- Hexagon LED grid lighting
The Showcase Garage
A high-tech, showroom-quality space for luxury vehicles.
- Motorized overhead storage lifts
- EV charging station prep
- Smart climate control/heating
- Premium metallic floor finishes
- Integrated audio
Key Benefits
- Eliminate concrete dust and oil stains forever
- Massively expand storage by utilizing wall and ceiling space
- Create a bright, clean, inviting entry to your home
- Protect luxury vehicles in a showroom environment
- Prepare for the electric vehicle future
Our Process
Floor Prep
Diamond-grinding the concrete to ensure permanent coating adhesion.
Coating Application
Applying base coats, flake, and durable polyaspartic topcoats.
Electrical
Wiring new LED grids, EV chargers, and smart openers.
Storage Install
Mounting slatwalls, cabinets, and overhead racks.
Tech Integration
Setting up smart hubs and motorized lifts.
Cost Guide
A smart garage makeover ranges from about $4k for a coated floor and lighting refresh to $18k or more for a showroom garage with motorized lifts, EV charging, and climate control. The cost builds from the floor up: the coating and lighting transform the feel immediately, then storage systems and smart technology layer on. The estimates below reflect typical Utah two- and three-car garages where the space doubles as an entry and workshop.
Floor coating system
Polyaspartic coatings cost more than epoxy but cure in a day, resist UV yellowing, and won't chip — a worthwhile step up for the surface you use daily.
Storage scope
Modular cabinetry, slatwall, and overhead racks are the biggest driver after the floor, scaling with how much wall and ceiling you outfit.
EV charging
Running a dedicated 240v line and installing a charger adds electrical labor and materials, typically $1.5k–$4k.
Motorized overhead lifts
Ceiling-mounted lifts that lower heavy items on demand are a premium convenience that adds to the showcase tier.
Climate and lighting upgrades
Smart heating for Utah winters, hexagon LED grids, and integrated audio round out the high-end build.
Project Timeline
Floor prep
1 dayDiamond-grinding the concrete to ensure permanent coating adhesion.
Coating application
1–2 daysApplying base coats, decorative flake, and durable polyaspartic topcoats.
Electrical
1–2 daysWiring new LED grids, an EV charger, and smart openers.
Storage install
2–4 daysMounting slatwall, cabinets, and overhead racks.
Tech integration
1–2 daysSetting up smart hubs, motorized lifts, and audio.
Materials & Options
Polyaspartic floor coating
Four times stronger than epoxy, UV-stable, and flexible, polyaspartic resists Utah road salt, hot tires, and chips while curing in a single day.
Steel modular cabinetry
Heavy-gauge steel cabinets handle garage temperature swings and heavy tools far better than particleboard.
Slatwall storage systems
Wall-to-wall slatwall gets gear off the floor and keeps everything reconfigurable as needs change.
Overhead storage racks
Ceiling racks and motorized lifts reclaim the wasted volume overhead for seasonal and bulky items.
EV charging station
A dedicated 240v charger future-proofs the garage and delivers a full overnight charge for any electric vehicle.
Permits in Utah
The floor coating, cabinetry, and slatwall in a garage makeover do not require a permit, but the electrical work does — a dedicated 240v circuit for an EV charger, new lighting circuits, and smart openers all require an electrical permit and inspection in Utah cities. Adding conditioned heating may involve a mechanical permit. Inspectors verify the EV circuit, panel capacity, and GFCI protection. We handle the electrical permit and coordinate the inspection so the charger and wiring are code-compliant.
Maintenance
- Sweep or dust-mop the coated floor regularly and rinse off road salt in winter to protect the finish.
- Wipe up oil or chemical spills promptly, though polyaspartic resists staining far better than bare concrete.
- Check overhead rack and lift anchors periodically to confirm they remain securely fastened.
- Have the EV charger and its circuit inspected if you notice any heat or tripping at the breaker.
- Clean the LED fixtures and confirm smart openers and hubs stay updated for reliable operation.
Common Mistakes to Avoid
Choosing epoxy over polyaspartic
Epoxy yellows in sunlight and chips under hot tires, so it often needs redoing in a few years while polyaspartic holds up for far longer.
Skipping proper floor grinding
Coating over un-ground or sealed concrete leads to peeling; mechanical grinding is what makes the finish permanent.
Adding an EV charger on an overloaded panel
A 240v charger on a maxed-out panel trips breakers or overheats wiring, so panel capacity must be verified first.
Leaving storage on the floor
The whole value of the makeover is reclaiming space; keeping bins on the floor squanders the wall and ceiling systems you paid for.
Related Services
Reclaim the biggest under-built room in your house.
Never shovel snow again. Effortless Utah winters.
Play Pebble Beach in your basement.
Keep the mud where it belongs. Spoil your best friend.
Frequently Asked Questions
Request an Estimate
Tell us about your smart garage makeovers project.